The MEP PRO system accurately measures the power and the pushing position of each foot, mapping them to the rotation angle
Gamma and Precision
Force gamma (N): from -200 to +1000
Force resolution (N): 0,5
Force precision (%): 0,5 of Full Scale
Force repeatability (%): 0,25 of Full Scale
Position gamma (mm): from 25 to 75
Position resolution (mm): 0,1
Position precision (mm): +/-0,5
Position repeatability (%): 0,25
Angle gamma (°): from 1 to 360
Angle resolution (°): 1
Angle precision (°): +/-2
Cadence gamma (RPM): from 30 to 180
Cadence resolution (RPM): +/-0,1
Cadence precision (RPM): +/-0,5 at 90 RPM
Battery
Technology: Lithium
Type: rechargeable
Location: integrated into the spindle
Number of charges: 500
Life of a single charge: up to 50 hours
Recharging time: about 5 hours
Typical MEP PRO battery discharge in continuous work. As the plot shows, a single charge lasts up to 50 hours. At 20 % of charge it is recommended to switch off and recharge.
System compatibility
Spindle diamater (mm): 24
Spindle width (mm): from 90 to 95 with integrated adjuster
Q-Factor (mm): 154
Pedal length (mm): manually adjustable from 165 to 180, at 2.5 mm steps
Pedals interface: 9/16"‐20UN threaded hole
Total weight (g): 1,150
Working temperature (°C): +15/+30
Material: alluminum 7075 and high resistance steel
Construction technology: CNC machined with centesimal precision
Structural resistance: ISO 4210‐8:2014 (support more than 100,000 cycles from 0 to 1,800 N)
Water/dust resistance: IP30
Maximum athlete weight (Kg): 100
Software requirements
Operating System: Windows 7, Windows 8, and Windows 10
Processing Unit (minimum): dual core 2,5 GHz
RAM memory (minimum): 4 GB
Free USB slots (minimum): 1
Graphics Card: with at least 512 MB of on‐chip memory
Data transmission protocol: wireless 2.4 GHz MEP protocol (each second 200 force and posture data are sent for each foot)
